Multifunctional 80V 30A-180A Congigurable Efuse with Antispark Switch

Warning: Always plug your ESC to the E-fuse first, then plug the E-fuse to your battery/power source. Never plug your ESC into an E-fuse which is already powered on. Otherwise will cause spark and may damage the E-fuse or your devices.

All in one function

• It's an electroinc fuse, much quicker protection response than physical fuse
• It's configurable for different protection current rate from 30A to 180A
• It includes anti spark function
• It support different ways to power on/off
• Momentary button
• Latching button
• Ignite key
• Roll to turn on/ auto turn off after 20minutes 

Electronic Spec

• 3oz Aluminum substrate power stage with stacked logic board.
• High side N-MOSFETS, 100V 300A x 3.
• Low side shunts for current sample, 0.5mΩ x 5.
• 80V max battery voltage, with 20V MOSFETS margin, 100V can be achieved by change the MOSFETS.
• Less than 100uA shut off current.
• Size: 58*50*20mm 
• Cable in:  10AWG *6cm with Amass XT90 male connector
• Cable out: 10AWG *6cm with Amass XT90 female connector

Aluminum PCB design cause less heat, and 4pcs Copper bar to strengthen current loading ability 

Shipping comes 

• Efuse switch 
• Accessory pack including : momentary power button / ignite key port cable

Warning 

• 180A set efuse is not in warranty.
• If you choose ignite key to power on, must toggle"roll on" in "off "

User Manual